Buffers and Standards

Hydrogen ion buffers comprising a mixture of a weak acid and its conjugate base or vice-versa and used to stabilize pH; also diluents, washing solutions, and standard-value solutions used for a broad array of scientific calibration purposes.

The buffers used to calibrate pH meters may be certified and/or traceable to the National Institute of Standards and Technology (NIST). These buffers may also be color-coded for easy identification:

Red: pH 4.0
Yellow: pH 7.0
Blue: pH 10.0

Chromatography Standards (18,652)

Spectroscopy Standards (6,291)

General Chemistry Solutions (5,241)

Matrix Blanks and Standardization Solutions (4,201)

Life Science Buffers (3,419)

Electrochemistry Buffers (2,254)

Environmental Testing Standards (1,917)

Electrochemistry Standards (1,180)

Karl Fischer Buffers and Reagents (585)

Viscosity Standards (224)

Quality Control and Proficiency Samples (195)

Isotope Standards (170)

Kjeldahl Buffers and Reagents (100)

Gel Filtration Standards (55)

Matrix Modifiers (30)

Osmolality Standards (13)

Polarimetric Standards (4)

Smoke Point Reference (2)

1 – 15 of 38,853 results

PBS, Phosphate Buffered Saline, 10X Solution, Fisher BioReagents™

Commonly used buffer

Promotions are available

Pricing & Availability
Specifications

Content And Storage	Room temperature
Form	Liquid

Buffer Solution, pH 4.00, Color-Coded Red (Certified), Fisher Chemical™

pH/temperature conversions given on label

Promotions are available

Pricing & Availability
Specifications

Boiling Point	100°C
Description	pH/temperature conversions given on label.
Color	Red
Traceability to NIST	Traceable to NIST.
Physical Form	Liquid
Chemical Name or Material	Buffer Solution, pH 4.00, Color-Coded Red
Grade	Certified
Identification	Pass Test
ChemAlert Storage Symbol	Gray
Density	1.0g/cm³
Absorbance	Pass Test
Concentration or Composition (by Analyte or Components)	Potassium Hydrogen Phthalate
CAS	16423-68-0
Health Hazard 3	Emergency Overview Contains a known or suspected carcinogen. The toxicological properties have not been fully investigated. Use personal protective equipment. Ensure adequate ventilation. Wash off immediately with plenty of water for at least 15 minutes. Get medical attention immediately if symptoms occur. Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Obtain medical attention. Move to fresh air. If breathing is difficult, give oxygen. Get medical attention immediately if symptoms occur. Do not induce vomiting. Do not induce vomiting. Obtain medical attention. NFPA Health:1 Flammability:0 Instability:0
MDL Number	MFCD00146206
Health Hazard 2	CAUTION!
Solubility Information	Soluble in water
pH	4.0
Specific Gravity	1
Melting Point	0°C

Buffer Solution, pH 6.00 (Certified), Fisher Chemical™

Promotions are available

Pricing & Availability
Specifications

Boiling Point	100°C
Color	Undesignated
Traceability to NIST	Traceable to NIST.
Physical Form	Liquid
Chemical Name or Material	Buffer Solution, pH 6.00
Grade	Certified
Identification	Pass Test
ChemAlert Storage Symbol	Gray
CAS	1310-73-2
Health Hazard 3	Emergency Overview May cause eye, skin, and respiratory tract irritation. Handle in accordance with good industrial hygiene and safety practice. Wash off immediately with plenty of water for at least 15 minutes. Get medical attention immediately if symptoms occur. Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Obtain medical attention. Move to fresh air. If breathing is difficult, give oxygen. Get medical attention immediately if symptoms occur. Do not induce vomiting. Obtain medical attention. . . NFPA Health:1 Flammability:0 Instability:0
MDL Number	MFCD00134130
Health Hazard 2	CAUTION!
pH	6.00
Melting Point	0°C

Buffer Solution, pH 7.00 (Certified), Fisher Chemical™

Potassium Phosphate Monobasic/Sodium Hydroxide

Promotions are available

Pricing & Availability
Specifications

Color	Colorless
Traceability to NIST	Traceable to NIST.
Physical Form	Liquid
Chemical Name or Material	Buffer Solution, pH 7.00
Grade	Certified
Identification	Pass Test
ChemAlert Storage Symbol	Gray
Density	1.003g/cm³
Vapor Pressure	14mmHg at 20°C
CAS	7732-18-5
MDL Number	MFCD00134130
pH	7.00
Synonym	Chlorine Titrimeter Reagent
Melting Point	0°C

Buffer Solution, pH 10.00 (Certified), Fisher Chemical™

Potassium Carbonate/Potassium Tetraborate/Potassium Hydroxide/Disodium EDTA Dihydrate

Promotions are available

Pricing & Availability
Specifications

CAS	12228-88-5
Health Hazard 3	Emergency Overview May cause eye, skin, and respiratory tract irritation. Handle in accordance with good industrial hygiene and safety practice. Wear personal protective equipment. Wash off immediately with plenty of water for at least 15 minutes. Get medical attention immediately if symptoms occur. Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Obtain medical attention. Move to fresh air. If breathing is difficult, give oxygen. Get medical attention immediately if symptoms occur. Do not induce vomiting. Obtain medical attention. Obtain medical attention. . NFPA Health:1 Flammability:0 Instability:0
MDL Number	MFCD00146206
Health Hazard 2	CAUTION!
Color	Colorless
Traceability to NIST	Traceable to NIST.
Physical Form	Liquid
pH	10
Chemical Name or Material	Buffer Solution, pH 10.00
Grade	Certified
Identification	Pass Test
ChemAlert Storage Symbol	Gray

Buffer, Reference Standard, pH 7.00 ± 0.01 at 25°C (Color Coded Yellow), Ricca Chemical

Pricing & Availability
Specifications

CAS	7732-18-5
CAS Min %	0.48
Chemical Name or Material	Buffer, Reference Standard
CAS Max %	0.5

Buffer, Reference Standard, pH 4.00 ± 0.01 at 25°C (Color Coded Red), Ricca Chemical

Pricing & Availability
Specifications

Name Note	pH 4.00 ± 0.01 at 25 deg C (Color Coded Red)
CAS	7732-18-5
CAS Min %	0.99
Chemical Name or Material	Buffer, Reference Standard
CAS Max %	1.03

Buffer, Reference Standard, pH 10.00 ± 0.01 at 25°C (Color Coded Blue), Ricca Chemical

Pricing & Availability
Specifications

Boiling Point	100°C
Name Note	pH 10.00 ± 0.01 at 25 deg C (Color Coded Blue)
CAS	7732-18-5
Color	Blue
Solubility Information	Miscible
Physical Form	Liquid
pH	10
CAS Min %	0.39
DOT Information	Not Regulated by DOT
Chemical Name or Material	Buffer, Reference Standard
CAS Max %	0.41
Melting Point	0°C

Buffer Solution, pH 7.00, Color-Coded Yellow (Certified), Fisher Chemical™

Pricing & Availability
Specifications

Boiling Point	100°C
Description	Potassium Phosphate Monobasic/Sodium Hydroxide. pH/temperature conversions given on label.
Color	Yellow
Traceability to NIST	Traceable to NIST.
Physical Form	Liquid
Chemical Name or Material	Buffer Solution, pH 7.00, Color-Coded Yellow
Grade	Certified
Identification	Pass Test
ChemAlert Storage Symbol	Gray
Density	1.0g/cm³
Vapor Pressure	760mmHg at 20°C
Absorbance	Pass Test
CAS	1934-21-0
Health Hazard 3	Emergency Overview May cause eye, skin, and respiratory tract irritation. Handle in accordance with good industrial hygiene and safety practice. Wash off immediately with plenty of water for at least 15 minutes. Get medical attention immediately if symptoms occur. Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Obtain medical attention. Move to fresh air. If breathing is difficult, give oxygen. Get medical attention immediately if symptoms occur. Do not induce vomiting. Obtain medical attention. . . NFPA Health:1 Flammability:0 Instability:0
MDL Number	MFCD00134130
Health Hazard 2	CAUTION!
Solubility Information	Soluble in water
pH	7.00
Specific Gravity	1
Melting Point	0°C

Buffer Solution pH 4.0 at 25°C, Color Coded Red, Certified, LabChem™

Pricing & Availability
Specifications

Linear Formula	KHC₈H₄O₄
Color	Red
Traceability to NIST	Traceable to NIST
Physical Form	Liquid
Chemical Name or Material	Buffer Solution pH 4.0 at 25°C
Grade	Certified
Identification	Passes Test
Density	1g/mL
Name Note	Color Coded Red
CAS	67-56-1
Health Hazard 3	GHS P Statement If in contact with skin or eyes, rinse thoroughly with water for 15-20 minutes. If swallowed, get medical attention.
Decomposition Information	Formaldehyde; Carbon monoxide; Carbon dioxide
Health Hazard 2	GHS H Statement Solution is not hazardous.
Solubility Information	Soluble in water
pH	4.00 to 4.01
Recommended Storage	Room Temperature
Formula Weight	204.23
Specific Gravity	1g/mL
CAS Max %	0.005

Invitrogen™ NuPAGE™ MOPS SDS Running Buffer (20X)

Made with high-purity reagents and are strictly quality controlled.

Pricing & Availability
Specifications

Formulation	50 mM MOPS, 50 mM Tris Base, 0.1% SDS, 1 mM EDTA, pH 7.7, 0.01-0.09% N,N-dimethylformamide
Physical Form	Liquid
pH	7.7
Chemical Name or Material	Running Buffer
Recommended Storage	Contents: NuPAGE™ MOPS SDS Running Buffer (20X) Storage: +4°C to 25°C
Concentration	20X
Product Line	NuPAGE

TAE Buffer, Tris-Acetate-EDTA, 50X Solution, Electrophoresis, Fisher BioReagents™

Tris-Acetate-EDTA, CAS Number-77-86-1, 60-00-4, 6850-28-8, TAE, 4L, Gray, Tris (24%), Acetic Acid (5.0%), and EDTA (<2%)., DNase free, Pass Test, Filtered through a 0.2-micron filter., Electrophoresis, 50X Solution, Poly CUBE, Liquid, Protease free, DNase-, RNase- and Protease-Free, RT

Promotions are available

Pricing & Availability
Specifications

Name Note	50X Solution
Concentration or Composition (by Analyte or Components)	Tris (24%), Acetic Acid (5.0%), and EDTA (<2%).
CAS	6850-28-8
Protease	Protease free
Physical Form	Liquid
Grade	Electrophoresis
Synonym	TAE
Purity Grade Notes	DNase-, RNase- and Protease-Free
DNase	DNase free
Recommended Storage	RT
Filtered Through	Filtered through a 0.2-micron filter.
ChemAlert Storage Symbol	Gray

Tris-Glycine-SDS, 10X Solution (Electrophoresis), Fisher BioReagents™

Promotions are available

Pricing & Availability
Specifications

Color	Undesignated
Physical Form	Liquid
Chemical Name or Material	Tris-Glycine-SDS
Grade	Electrophoresis
Identification	Pass Test
DNase	DNase free
Filtered Through	Filtered through a 0.2-micron filter.
ChemAlert Storage Symbol	Gray
Name Note	10X Solution
Concentration or Composition (by Analyte or Components)	0.25M Tris Base, 1.92M Glycine, and 1.0% (w/v) SDS.
CAS	151-21-3
Protease	Protease free
Synonym	TG-SDS
Purity Grade Notes	DNase-, RNase- and Protease-Free
Recommended Storage	RT

pH Calibration Buffer Bottles, Oakton™

Pricing & Availability

TBS, Tris Buffered Saline, 10X Solution, pH 7.4, Molecular Biology, Fisher BioReagents™

Pricing & Availability
Specifications

Boiling Point	100°C
Color	Colorless
Physical Form	Liquid
Chemical Name or Material	Tris Buffered Saline
Grade	Molecular Biology
DNase	DNase free
ChemAlert Storage Symbol	Gray
Name Note	10X Solution
Concentration or Composition (by Analyte or Components)	10X solution contains 1.37M Sodium Chloride, 0.027M Potassium Chloride, and 0.25M Tris/Tris-HCl.
CAS	7732-18-5
Protease	Protease free
pH	7.5
Synonym	TBS
Purity Grade Notes	DNase-, RNase- and Protease-Free
Recommended Storage	RT

Prev
1
2
3
4
5
6
...
2,591
Next

Buffers and Standards

Buffers and Standards

Filtered Search Results

Narrow Results